CAD EYE has been developed utilising AI deep learning technology and is compatible with Fujifilm’s ELUXEO™ endoscopy series to support endoscopic lesion detection and characterisation in the colon. Based on AI deep learning technology, CAD EYE allows to support real-time detection and characterisation of polyps and is aimed to improve the adenoma detection rate to expert level.
CAD EYE - Artificial Intelligence for Fujifilm Eluxeo
Detection in real time
CAD EYE is aimed to improve the real time polyp detection rate to expert level, helping to recognise flat lesions, multiple polyps simultaneously as well as any lesions at the corner of the image. CAD EYE Detection is possible with White Light and LCI (Linked Color Imaging) mode.
Once a suspected polyp is detected by CAD EYE Detection (WLI or LCI), CAD EYE Characterisation - in combination with BLI - can support endoscopists in the diagnosis of the polyp. This function analyses in real-time and without freezing or zooming if a polyp is hyperplastic or neoplastic, which is visually indicated by the use of different colour codes in the Position Map. CAD EYE Characterisation is aimed to make procedures more efficient by increasing the accuracy of diagnosis to expert-level.*
*According to the validation study, the accuracy of non experts with the assistance of CAD EYE Characterisation was equivalent to that of an expert.
For your daily examination
CAD EYE can be activated and deactivated simply by a push on the endoscope button or directly at the
processor. The function of each switch can be defined individually.
Full HD movies can be recorded and stored at the expansion unit EX-1. It can be controlled via the scope switch or directly at the ELUXEO™ processor.
CAD EYE works with the expansion unit EX-1 and the CAD EYE software EW10-EC02 in combination with the Fujifilm ELUXEO 7000 system.
Expansion Unit EX-1
|Compatible processor:||VP-7000 / EP-6000|
|Compatible scopes:||700 series colonoscopes|
|Video signals In:||DVI-I x1 (1920 x 1080)|
|Video signals Out:||DVI-I x1, DVI-D x1 (1920 x 1080)|
|Video recording function:||
Compatible with 700/600/500 series colonscopes
2 x RS-232C Connectors
|Power rating:||100-240 VAC +/- 10%, 50/60 HZ, 1.25 to 0.60 A|
|Dimensions:||370.0 mm x 99.0 mm x 465.6 mm (W x H x D)|
|Weight:||Approx. 7.1 kg|
The CAD EYE software EW10-EC02 can store up to 30 hours of video material in its internal memory.
Full-HD (1920 x 1080)
|Video frame rate:||30 fps|
|Video file format:||.mp4|
|Max. recording time of a file:||
|Max. amount of time:||30 hours can be stored on internal memory|
USB flash drive for CAD EYE installment and the user manual